Window of System Elements

Sprachen:

Deutsch
English

The system elements in Talsim-NG are filled by two types of windows.

General window of system elements

In a general window, the settings, which are to a large extent common to all elements, are predefined. This window also opens automatically when a new system element is created. It contains the tabs:

Identification

4-digit unique identification of the element; the first letter is determined by the element type

Short description of the system element
Procedures: Identifiers of the drain elements. Depending on the type of element there is the possibility to assign one or more drain elements. To do so, select the corresponding element from the list on the right side of the window and assign it to the desired drain using the arrow key.
Flow direction: Display of the flow direction in the system plan. Setting has no effect on the calculation.
Symbol

Symbol with which the system element is to be displayed in the system plan. For each element type there are different selection options with a short description of what the symbols are intended for. The symbols have no influence on the calculation of the system element and a differentiation within an element type only serves to improve the clarity of the system plan. Each user can therefore make a distinction according to his own criteria or use the default symbol.

Description: detailed description of the system element

Key
Fenster Systemelemente Abläufe EN.PNG

Outflows
Fenster Systemelemente Fließrichtung EN.PNG

Flow direction
Fenster Systemelemente Symbol EN.PNG

Symbol
Fenster Systemelemente Beschreibung EN.PNG

Description

This window can also be opened later by right-clicking on the system element and selecting Identifier, Sequences or Flow direction from the appearing menu and changing the settings.

Data sheet of system elements

The second window is the data sheet of the respective system element and differs according to the element type. It contains the calculation methods for the system element as well as the corresponding parameters and parameters.

The data sheet can be opened by double-clicking on the system element or by right-clicking -> Data Sheet.