Translations:Kontextmenü der Systemelemente/4/en
Version vom 1. Dezember 2020, 09:44 Uhr von Froehlich (Diskussion | Beiträge)
| Menu item | Description |
|---|---|
| Data sheet | Data sheet of the respective system element opens |
| Identification | The general window of system elements opens |
| Processes | |
| Flow direction | |
| Mark upper layer | All system elements which are above or upstream of the system element are marked. |
| Surface Runoff | Surface Runoff of the system element opens |
| Rules + Controls | Control logic is displayed in the system plan. It acts only on the element system outlet and on storage elements which are controlled. Reservoir: State groups that control the storage element, directly at the storage element (yellow); all other state groups on the left side of the flow network map (green); surface runoff (green) at their system elements. System outlet: At the system outlet, the total surface runoff is displayed, and also the surface runoff displayed at their system elements. |
| Animation | is no longer supported |
| Delete | System element is deleted - including all connections and system states of the element. |
| Set as start element | System element is defined as start element and marked with a red frame in the system plan. If a start element is defined, then after starting the simulation only the subsystem is simulated, which has the start element as its lowest point, i.e. only the start element and its upper layers are simulated. |
| Define result output | Window, in which the result output can be defined, opens. It is possible to output hydrographs and balances for the system elements. |