Betriebsplan/en

Navigation
| |

Talsim-NG includes a reservoir operation model, i.e.it offers the possibility to simulate storage regulation and distribution through defined operating rules. Existing or proposed operating rules need to be converted into a Talsim-NG compatible form.

The model equivalent to conducting measurements within the river basin is the retrieval of so-called system states of the system elements. Further, these system states are processed and connected to mathematical and logical operators (also consecutively) into control clusters. The variety of options and possible connections allows for the representation of almost any desired operating rule. The system state / the control cluster representing the operating rule is linked to the system element to which the rule should be applied to. In the case of a reservoir, physical boundaries for releases as well as internal dependencies can be implemented. This results in the control logic of the river basin model.

System State

To determine how to represent a system state / system states, one should consider the following questions reagarding the operation rules:

Subject	Questions about real-world operating rule	Questions about Talsim-NG river basin model	Implementation in Talsim-NG
Measured variable	Which measured variables are the operating rules based on? Which variables are measured?	Which is the equivalent simulated variable, or which simulated variable could be used for reference / derivation? All simulated variables i.e. the system element's input, output, and state variables are generally accessible (e.g. discharge, reservoir volume, ...).	Choose a system element and a simulated variable. → Implement a system state.
Spatial reference	Which location is the measurement made at?	Which specific system element (key) represents the measurement (with which simulated variable for the system state)?
Temporal reference	What is the temporal reference of the measurement? Is the instantaneous value used, a balance, or a previous day's value?	Which of the available options in Talsim-NG represents the temporal reference best?	Define the objective of the system state and adjust the options for value changes respectively.
Transformation	Is the measured value changed subsequently before its inclusion in the operating rule (e.g. unit conversion, weighting function, ...)?	Which function in Talsim-NG represents the transformation?	Select and implement the transformation function of the system state.

After answering the questions, a system state can be created. Subsequently, state attributes describing the system state can be specified. The following options are available:

Sytem State Attributes

Talsim-NG offers the following types of system state attributes:

A	Current value	Value is the current value without any modifications
F	Function	Value is transformed by applying a function
B	Balance (with target)	Value is used as a discrepancy from the target value in %
C	Balance (without target)	Value is calculated as a balance from several timesteps
Z	Objective function	Value is the result of an objective function
P	Control gauge	Currently disabled
S	Sum	Value is not a single value but is calculated as the sum of the system state

Current Value

The option current value uses the simulated value of the current timestep without any modifications:

result = current value of the system state

Function

The option function also uses the current timestep as time reference, but it includes the possibility to transform the value by applying a function. As the values from this option and all the following options (current value is the only exception) can be transformed as well, the general transformation process will only be explained in the next section.

Balance

A balance can be defined as

Datei:Schema Definition Bilanz EN.png

choises to define a balance

1. an average over the last n time steps (max. 1200)
2. a fixed timeframe (start date to end date)
3. a constant timeframe (moving average)
4. the i-th time step

In the case of Balance(without target), the balance itself is the start value for the subsequent transformation.

In the case of Balance (with target) the discrepancy is used as start value for the Transformation and is calculated as follows:

Discrepancy = ((BALANCE- target value) / target value) * 100

The target value is defined as a constant possibly scaled with an annual pattern.

Sum

Value Modification

Transformation Function

The system states can be transformed additionally by means of a function (exception: Type Current Value). The options include

KNL	Capacity curve
JGG	Fixed annual pattern
GGL	Variable annual pattern
LAM	Zoning plan / pool-based operating plan
XYZ	Time-dependent function

Capacity Curve

The simplest option and the default for any system state that is not treated as current value is the capacity curve. Here the supporting points of a function are entered, according to which the values are transformed. The functions entry value in each case is the system state according to its type (e.g. current value with type function, balance with type balance (without target) or discrepancy (%) with balance (with target)). The function can be interpreted as a step function or interpolated between the supporting points.

If the user chooses not to perform a transformation, the capacity curve can be defined as a 1:1 function. It is important that the entire value range is included, because otherwise the y-value of the first supporting point is used for values smaller than the first supporting point and the y-value of the last supporting point for values bigger than the last supporting point. In addition, the interpolate points option must be set here.

Function: entries unchanged

X-Wert	Y-Wert
-10000	-10000
10000	10000

If the user chooses to define constants for the implementation of the operating, it is likewise possible with the option capacity curve:

Function: result= constant

X-Wert	Y-Wert
0	20
1	20

Annual Pattern

In the option annual pattern, a function with one supporting point is defined for various time periods within a year. With a constant annual pattern, the subdivision is done by month, resulting in a total of 12 supporting points. In the case of the variable annual pattern the subdivision is made at any desired date.

For every (temporal) supporting point in the annual pattern values for x and y are declared. Is the system state bevor the transformation smaller than the x value, it is set to zero. Is it equal or bigger than the x value, it is transformed to the y value. The current date / timestamp decides which supporting point is used for the transformation.

Default is that the supporting points are kept constant within each respective time frame. Yet, it is also possible to interpolate over time(???)

Pool-based Operating Plan

With the option Pool-based operating plan the reservoir storage during a year is subdivided in different zones (pools) each pool is associated with a fixed release level. Hence any amount of increasing release levels is defined and for each defined time period the reservoir storage for each release level is given. However, the option Pool-based operating plan is not restricted to described usage. Generally, any chosen x-value (usually: reservoir storage) can be transformed time-dependent into a y-value (usually reservoir release) via a pool-based operatin plan. The y-values of the supporting points are increasing and identical for every timestep.

By default, the supporting points given by the user are interpreted as step values(?). However, it is possible to interpolate in time and / or between the supporting points of x-/y-values.

• 

  Comparison of a pool-based operating plan in the two- and three-dimensional representation,
  Interpretation: constant block (steps)

• 

  Comparison of a pool-based operating plan in the two- and three-dimensional representation,
  Interpretation: linearly interpolated (both in time and between pools)

Time-dependent Function

The time-dependent function is quite similar to the pool-based operating plan, yet more flexible: Among the different time periods, the supporting points of the y-values only have to correspond regaring count, but do not have to be identical in value. Furthermore, they do not necessarily have to be increasing. Hence for each time period any function with any chosen x- and y-value can be definend.

By default, the supporting points given by the user are interpreted as step values(?). However, it is possible to interpolate in time and / or between the supporting points of x-/y-values.

Control Cluster

A control cluster is the linkage of system states and other control clusters with mathematical and logical operators. While a system state represents the condition of a system element, a control cluster can be a unified representation of several system states.

The following operators are available for linkage:

+/-	Addition and Subtraction
●/÷	Multiplication and Division
<>≤≥	Comparative Operators
mn, mx	Minimum, Maximum

A control cluster can consist of up to five different system states and/or control clusters. As control clusters can continuously be linked further there is no effective limitation regarding number. Any possible combination is feasible. There are no limitations regarding e.g. combination of different values and units. To reach a sensible combination is the obligation of the user.

The system states/ control clusters from which a new control cluster is to be build can be scaled with a factor before linkage with an operator (see some window(?)).

The control cluster itself, corresponding to the system states, has the state attribute type and can be transformed further with a transformation function (see state attribute something).

Lastly the control cluster can be limited in its value range (see connections).

Control Logic

When a rule in a control cluster/ system state is assigned in a way that it represents the desired release from a reservoir or the division from a diversion, the control cluster/ system state is connected with the respective system element. Dependencies among various releases can be implemented either in the definition of a control cluster or using the option internal dependency from the reservoir element.