Zeitreihenverwaltung/en

Navigation
| |

Time series can be stored in TALSIM-NG's own time series manager, where they are classified by the type of data and the station they belong to. There they can be viewed graphically and edited tabularly. A basic statistics' tool, which can calculate average values for a defined period of time as well as other statistics, is also integrated in the time series manager.

Opening the Time Series Manager

The time series manager can be accessed via the Menu bar → Time series → Time series manager. The Talsim-User Selection window, where you are required to choose a user to proceed, appears. If you want to create and edit time series, you should choose your username and confirm with OK. If you log in using another username, you can only see the stations and time series, but you cannot edit or delete them.

If you are logged in with your username and have not created any time series yet, an empty TalsminNG - TS Explorer opens. This explorer can be customized using View, Folder, as well as the folder icon.

Create New Station

Time series are principally assigned to stations, e.g. measuring stations. For this reason a station should be created first. To do this, right-click on the Explorer → New Station. A window, where you can enter the name of the station and confirm with OK, will appear.

Subsequently, a new station, as well as 15 subfolders are created. These subfolders present the different types of the hydrological, hydrometeorological, or reservoir-dependent variables that can be saved as time series in the TS Explorer.

You have a choice of the following options when you right-click on the new station in the explorer.

New Station	A new empty station with 15 subfolders is created.
Edit Station	The dialog window Edit of a Talsim time series station, in which information about the selected station can be edited, is opened.
Delete Station	The marked station and all associated time series are deleted. This operation cannot be undone.
Copy to Clipboard	The list of time series associated with the station as well as their metadata is copied to the clipboard.
New Time Series	A new time series associated with the selected station is created.
Release Edit-lock	Releases the edit-lock of the station, so it can be edited by another user.

Create New Time Series

To create a time series, right-click on the Station → New Time Series in the time series explorer. A window will open, prompting you to enter the name of the new time series. Confirm with OK.

The following attributes are displayed for each time series in the explorer:

Name	Name of the time series.
ID	Identification number of a time series. ID corresponds to the ID of the binary file, stored in the system data. Caution: Not to be confused with the ID of a simulation in the model and on the server.
Type	Hydrological, hydrometeorological, reservoir-dependent or geological variable. With this setting the time series is assigned to one of the 15 subfolders of the station. Default value: discharge.
Unit	Unit of the values. Default value: m³/s.
Interpretation	Information about the time series values, i.e. how to understand the timestamp and the value stored in it. Caution: wrongly set interpretations inevitably lead to incorrect results. For example, precipitation [mm] is usually a sum per timestep. Default value: Current_value (linear_interpolation)
Origin	Origin of the time series. Default value: measured.
from	Date and time of the start of the time series. Default value: Day and time of creation.
to	Date and time of the end of the time series. Default value: Day and time of creation.
Data points	Number of data points. Default value: 0

The created time series is assigned the chosen name and a consecutive ID number. The other attributes are filled with the default values.

You can use the following buttons if you right-click on the time series in the explorer.

Edit Time Series	The selected time series can be edited.
Chart	The time series can be displayed as a graph over time or as a duration curve.
Edit Values	Values with date are added to the selected time series. Values can also be edited or deleted.
Statistics	Calculates a statistical overview of the time series.
Import Time Series	An existing time series can be imported.
Export Time Series	The selected time series can be exported.
Delete Time Series	The selected time series is deleted. This operation cannot be undone.
Release Edit-lock	Releases the edit-lock of the time series, so it can be edited by another user..
Refresh Attributes	After adjusting the attributes of a time series, those attributes are updated in the explorer.

Edit Time Series

To adjust the attributes of a time series, right-click on Time Series → Edit Time Series in the time series manager.

The following dialog window, where you can edit the attributes, opens. The attributes assigned to identification and settings, which are displayed in black, can be adjusted with a double-click. By clicking OK all time series attributes can be saved.

Identification	Description	Description of the time series
	Name	Name of the time series
Settings	Altitude masl	Height of the measuring station in meters above sea level
	Coordinate-X	X-coordinate of the measuring station
	Coordinate-Y	Y-coordinate of the measuring station
	Interpretation	Information about the time series values, i.e. how to understand the timestamp and the value stored in it. Caution: wrongly defined interpretations inevitably lead to incorrect results. Choice of: BlockLeft_(value_right) BlockRight_(value_left) Instantaneous_(Linear_Interpolation) Cumulative CumulativePerTimeStep Undefined
	Memo	Description of the origin of the time series and other additional information
	Origin	Origin of the time series Choice of: derived measured imported manual simulated miscellaneous synthetic
	Type	Hydrological, hydrometeorological, reservoir-dependent or geological variable With this setting the time series is assigned to one of the 15 subfolders of the station. Choice of: area discharge evaporation humidity mass movement precipitation pressure soil process storage sunshine temperature unknown velocity water level wind
	Unit	Unit of the variable Choice of: ?,empty, number, class, mm/m, percent, h/d, 0/00, ml/l, mm, m, cm, km, hm, dm, l/ha, l/km², l/m², mNN, m², km², ha, cm², mm², dm², m³/m, m³, Tsd. m³, Mio. m³, l, hl, km³, cm³, mm³, m/s, mm/d, mm/h, mm/min, l/s/km², m/h, m/d, l/s/ha, m/s², m³/s, l/s, m³/d, m³/h, l/h, l/d, °C, kg, g, mg, t, s, min, h, d, w, mon, a, Datum, A, bar, pa, hpa, Grad, Rad, kg/m³, mg/l, g/l, l/kg, ml/g, Grad_C, kg/s, y/n

Time Series Values

After a new time series is created and edited, values can be added to it. To do this, right-click on the Time Series → Edit Value. If a time series with values already exists, the values can be edited or deleted.

You can use the following buttons.

Edit	Selected values of the time series can be edited.
Add	Values can be added to the time series.
Delete	Selected values of the time series can be deleted. This operation cannot be undone.

Add Values to Time Series

To add new values to the time series, click on add. The following TalsimNGZreProvider window opens. This indicates that the time series does not contain any values yet, and is, therefore, not stored on the server on in the database. By clicking OK the window for editing the time series values opens.

Here you can use the following buttons:

Insert Row	A row is inserted above the selected cell.
Add Row	A row is added to the end of the time series.
Remove Row	The selected row is removed.
Graph	The time series is displayed graphically.
Check dates	The date of the time series is checked. This means that the date must be ascending in time.
Write values	The time series and its values are stored on the server and in the database. Additionally, a binary file, named after the ID of the time series, is created in the system data.
Delete values	All values are deleted.

The 'Edit time series' window shows the active time series, as well as the date, which by default corresponds to the date of creating the time series, unless it has been manually changed. Here you can manually enter a date and its corresponding value. You can also copy a time series with dates and values e.g. from Excel and click on the first cell of the table and paste it there (key combination: Ctrl+V).

When the values are inserted, the time series can be displayed using Graph.

In the next step the date is checked. If the dates are ascending, a window with "Check successful!" will appear. Otherwise an error message will be displayed.

If all values are complete and the date is checked, the values are written. In the window that opens, click on Yes' to confirm, No or Cancel to cancel.

With a confirmation window the implementation of the values into the time series was completed as successful. The editing window can be closed. Only with this step the time series is saved in the time series database and as a binary file in the system data and exported to the server.

Edit values in the time series

Time series can be edited by right clicking on the Time Series -> Edit Values -> Edit. The active time series with the appropriate date is displayed. Now you can select the time period for which you want to make changes and then load it into the edit window. The data will be displayed accordingly. With the other buttons you can edit the time series as already described under add values to time series.

Display time series graphically

A time series is displayed graphically by right-clicking on Time Series -> Charts. You have the choice between a hydrograph (Time series chart) and a duration curve.

Evaluate time series statistically

Right click Time Series -> Statistic opens a statistic tool with which you can calculate the statistical moments for a selected period. Furthermore you can perform a low and high water analysis. The results will be displayed if you click on 'Calculate after entering the data.