Wasserinfrastruktur/en: Unterschied zwischen den Versionen

Aktuelle Version vom 30. August 2021, 09:11 Uhr

Sprachen:

Deutsch
English

Structural changes in the natural river basin and the operation of water resources structures can have a significant influence on the water balance and must therefore be able to be represented in a river basin model. In reality there are a multitude of hydraulic structures, such as canals, dams, flood control reservoirs, stormwater retention basins, abstraction and discharge structures, weirs, hydroelectric power plants, etc. In the river basin model Talsim-NG these structures can be abstracted and simulated using the following four system elements:

The system elements storage and diversion offer the possibility to control their outputs with complex operating rules. In Talsim-NG hydroelectric power plants can be simulated using the storage system element. If a run-of-river hydroelectric plant is to be needs to be simulated, the corresponding water course section must be defined as a storage.

@@ Zeile 1: / Zeile 1: @@
 <languages/>
-{{Navigation|before=River basin calculation|high=River basin model|after=Management model}}
+{{Navigation|vorher=Fließgewässerberechnung|hoch=Flussgebietsmodell|nachher=Bewirtschaftungsmodell}}
-Structural changes in the natural river basin and the management of the structures can have a significant influence on the water balance and must therefore be able to be represented in a river basin model. In reality there are a multitude of hydraulic structures, such as canals, dams, flood control reservoirs, stormwater retention basins, abstraction and discharge structures, weirs, hydroelectric power plants, etc. In the river basin model Talsim-NG these structures can be abstracted and calculated with the following four system elements:
+Structural changes in the natural river basin and the operation of water resources structures can have a significant influence on the water balance and must therefore be able to be represented in a river basin model. In reality there are a multitude of hydraulic structures, such as canals, dams, flood control reservoirs, stormwater retention basins, abstraction and discharge structures, weirs, hydroelectric power plants, etc. In the river basin model Talsim-NG these structures can be abstracted and simulated using the following four system elements:
-*[[Special:MyLanguage/Einleitung|Introduction]]
+*[[Special:MyLanguage/Einleitung|Point source]]
 *[[Special:MyLanguage/Transportstrecke|Transport reach]]
 *[[Special:MyLanguage/Verbraucher|Consumer]]
-*[[Special:MyLanguage/Speicher|Reservoir]]
+*[[Special:MyLanguage/Speicher|Storage]]
-The system elements [[Special:MyLanguage/Speicher|reservoir]] and [[Special:MyLanguage/Verzweigung|diversion]] offer the possibility to control your outputs with complex operating rules.
+The system elements [[Special:MyLanguage/Speicher|storage]] and [[Special:MyLanguage/Verzweigung|diversion]] offer the possibility to control their outputs with complex operating rules.
-In Talsim-NG hydroelectric power plants can only be mapped in the system element Storage. If a run-of-river hydroelectricity is to be mapped, the corresponding watercourse section must be defined as [[Special:MyLanguage/Speicher|reservoir]].
+In Talsim-NG hydroelectric power plants can be simulated using the storage system element. If a run-of-river hydroelectric plant is to be needs to be simulated, the corresponding water course section must be defined as a [[Special:MyLanguage/Speicher|storage]].