<languages/>

{{Navigation|vorher=|hoch=Fenster der Systemelemente|nachher=Einzeleinleiterfenster}}

The properties window of the sub-basin can be opened by double-clicking on the element symbol in the flow network map [[Datei:Systemelement001.png|30px]] or by right-clicking → ''Properties''.

It has the three tabs ''Properties'', ''Simulation'' and ''Outflow network''. In the upper part of the window there are also three buttons for saving [[Datei:Button_speichern.PNG|Datei:Button_speichern.PNG]], applying values, as well as settings from other sub-basin elements in the same database (i.e. also from other variants and projects) [[Datei:Button_Werte_übernehmen.PNG|Datei:Button_Werte_übernehmen.PNG]], and closing the window. It is important to know that the sub-basin window also saves data automatically when closing.

[[Datei:Einzugsgebietsfenster_leer_EN.png|Datei:Einzugsgebietsfenster_leer_EN.png]]

==Properties==

In the properties tab, general charactersitics and parameters for topography, surface runoff retention and measures in the sub-basin are entered. Furthermore, the calculation mode for determining the fraction of precipitation which contributes to the runoff is selected and the required parameters are entered.


===Topography===

[[Datei:Einzugsgebietsfenster Topographie_EN.PNG|right]]The data to be entered in the Topography section is typically determined in a GIS. The area of the sub-basin is crucial for the amount of generated runoff, since the precipitation is processed into the Precipitation-Runoff-Modell as precipitation height [mm] and, therefore, has to be scaled with the area.
The degree of imperviousness dictates the percentage of impervious area in the sub-basin and describes the proportion that runs off as urban surface runoff. The urban surface runoff is [[Special:MyLanguage/Einzugsgebiet#Oberflächenwasservorrat (versiegelter Flächenanteil)|calculated]] separately from the remaining natural surface runoff and retained in a separate [[Special:MyLanguage/Einzugsgebiet#Abflusskonzentration|storage cascade]]. The [[Special:MyLanguage/Einzugsgebietsfenster#Ablaufzuordnung|discharge sequence assignment]] can also be used to assign this runoff to a different outflow element.
The values for longest flowpath and maximum and minimum elevation are used to automatically calculate the [[Special:MyLanguage/#retention--oberflächenabfluss|surface runoff retention constants]].


=== Retention - Surface Flow===

[[Datei:Einzugsgebietsfenster Retention Oberflächenabfluss_EN.PNG|right]]
The [[Special:MyLanguage/Einzugsgebiet#Abflusskonzentration|discharge concentration]] parameters of the surface flow are entered in the ''Retention - surface flow'' section. Using the ''calculate'' button, they can be automatically calculated from the input values in the [[Special:MyLanguage/#topographie|topography]] section.
'''Attention''': if the box ''calculate automatically'' is checked, the parameters, that are calculated automatically, based on the current input in the topography section, are used for the simulation. If the retention constants of the surface runoff shall be changed and calibrated, the check mark must be removed first.

=== Measures in the Sub-Catchment===

[[Datei:Einzugsgebietsfenster Maßnahmen im EZG_EN.PNG|right]]
In the ''Measures in the sub-catchment'' section, the user can enter the [[Special:MyLanguage/Einzugsgebiet|depression losses]]. Using the ''Irrigation'' button an [[Special:MyLanguage/Irrigation window|irrigation scheme]] can be defined and connected.

=== Calculation Mode===

For the calculation of [[Special:MyLanguage/Einzugsgebiet#Infiltration_bzw._abflusswirksamer_Niederschlag_I.28t.29.2C_NW.28t.29|Infiltration or the runoff-effective precipitation]], Talsim-NG offers three calculation options, which can be selected in the Calculation Method section.

====Runoff curve number====

[[Datei:Einzugsgebietsfenster Berechnungsweise Abflussbeiwert_EN.png|Datei:Einzugsgebietsfenster Berechnungsweise Abflussbeiwert_EN.png]]

If the [[Special:MyLanguage/Einzugsgebiet#Konstanter Abflussbeiwert Ψ|discharge coefficient]] method is selected, a constant discharge coefficient between 0 and 1 can be entered. This determines the amount of precipitation that is discharged after deducting losses.

====SCS-CN Method====

[[Datei:Einzugsgebietsfenster_Berechnungsweise_SCS_CN_Methode_EN.png|Datei:Einzugsgebietsfenster_Berechnungsweise_SCS_CN_Methode_EN.png]]

If the [[Special:MyLanguage/Catchment#Event-specific discharge coefficient based on the Soil-Conservation-Service (SCS)|SCS-CN method]] has been selected as the calculation method, the CN value and the 21-day rainfall index can be entered in the lower area. In addition, a check box can be used to activate whether the SCS method is calculated with constant loss.

=====Extended procedure=====

[[Datei:Einzugsgebietsfenster_Berechnungsweise_SCS_CN_Methode_erweitert_EN.png|Datei:Einzugsgebietsfenster_Berechnungsweise_SCS_CN_Methode_erweitert_EN.png]]

In the extended procedure, not only the superficial direct runoff is determined, but also a [[Special:MyLanguage/Einzugsgebiet#Bodenfeuchtesimulation|soil moisture simulation]] is carried out for the infiltrated part and the components interflow and basic runoff are determined. For this purpose, the [[Special:MyLanguage/Elementarflächenfenster|elementary areas]] must be created using the corresponding button. For interflow and base discharge the retention constants for the calculation of the [[Special:MyLanguage/Einzugsgebiet#Abflusskonzentration|discharge concentration]] are also defined. The initial soil moisture can also be entered (default setting: 100%).
If the checkbox ''Use original soil layers'' is activated, the [[Special:MyLanguage/Bodentypenfenster|soil layers]] are used as entered by the user. By default, the soil layers are grouped into three [[Special:MyLanguage/Einzugsgebiet#Bodentyp/ Bodenart|internal calculation layers]] (infiltration layer, rooting layer and transport layer).

====Soil Moisture====

[[Datei:Einzugsgebietsfenster_Berechnungsweise_Bodenfeuchte_EN.png|Datei:Einzugsgebietsfenster_Berechnungsweise_Bodenfeuchte_EN.png]]

The calculation option [[Special:MyLanguage/Catchment Area#Soil Moisture Simulation|soil moisture simulation]] is the calculation option that requires the input of most parameters.
The catchment area is divided into individual elementary areas (hydrologic response units) using the [[Special:MyLanguage/Elementary Area Window|elementary areas (EFL)]] button. The catchment area window provides the option to assign a uniform slope to all elementary surfaces.

For interflow and base discharge the retention constants for the calculation of [[Special:MyLanguage/Einzugsgebiet#Abflusskonzentration|discharge concentration]] are defined.

If the calculation of the deep interflow and/or the deep base discharge is also activated via checkboxes, the retention constants must also be entered for these two discharge components, as well as the desired division ratio for the base discharge into base discharge and deep base discharge.
The initial soil moisture can also be entered (default setting: 100%).

If the checkbox ''Use original soil layers'' in the calculation area is activated, the [[Special:MyLanguage/Bodentypenfenster|soil layers]] will be used as entered by the user. By default, the soil layers are grouped into three [[Special:MyLanguage/Einzugsgebiet#Bodentyp/ Bodenart|internal calculation layers]] (infiltration layer, rooting layer and transport layer).

==Simulation Settings==

[[Datei:Einzugsgebietsfenster_Simulationseinstellungen_EN.PNG|right]]The Simulation Settings tab is used to define the loads on the catchment area and to select the calculation type for the snow calculation.

The selection of the [[Special:MyLanguage/Zeitreihenverwaltung|time series]] is done with the button ''Selection'' [[Datei:Button_Zeitreihe_zuordnen.png|Datei:Button_Zeitreihe_zuordnen.png]]. The button ''Display'' [[Datei:Button_Zeitreihe_anzeigen.png|Datei:Button_Zeitreihe_anzeigen.png]] opens a window with the [[Special:MyLanguage/Grafikfenster|time series graphics]].

[[Special:MyLanguage/Ganglinienfenster|constant hydrograph]] can be connected via their respective selection menus and can be deleted with the DELETE-key. By clicking the button ''Show chart'' [[File:Button_Ganglinie_ anzeigen.png|File:Button_Ganglinie_ anzeigen.png]], the [[Special:MyLanguage/Ganglinienfenster|hydrograph window]] opens, where the chart can be edited directly. It is important to note that the hydrograph can also be connected at other places in the model and that the changes are valid everywhere. If you want to modify a chart only for the current catchment area, a copy has to be created and connected before.

===Precipitation===

[[Special:MyLanguage/Einzugsgebiet#Niederschlag N(t)|Precipitation]] can be directly connected as a time series and can be scaled by a factor if necessary.
If no long-term simulation but a short-term forecast with model rain is to be calculated, the settings are controlled directly via the short-term forecast.

===Temperature===

The temperature can be entered either as a time series or as an average temperature, if necessary scaled with an annual and/or daily variation.

===Evaporation===

For the [[Special:MyLanguage/Catchment Area#Evaporation VP(t)|evaporation]] there is the possibility to connect a time series, to define a yearly evaporation or to use the values from a previously created [[Special:MyLanguage/Evaporation Window|evaporation calculation]].

===Base discharge: mean value===

A basic discharge can be specified as a mean donation and, if necessary, scaled with a yearly flow.

For soil moisture calculation, this value determines the start content (recalculated) for the basic runoff storage tank. From the l/s km² given here a volume is recalculated, which together with the retention constant of the base runoff gives this value for the base runoff at the beginning of the simulation.

===Snow===

== Sequence assignment==

[[Datei:Einzugsgebietsfenster_Abflaufzuordnung_EN.PNG|right]]If the catchment element has more than one runoff element, the different runoff components can be sent to different runoff elements in the Runoff Assignment tab. By default, the entire drain goes to the first drain. Using drag&drop, the drain components shown on the left can be dragged to the drains on the right of the screen to make or break the connection. By clicking on the drain components, the respective connection to the drain is marked red. Clicking on the drains will mark the connections of all inflowing drain components.